Best Way To Put Fl Studio On Mac

Posted on  by

This will allow you to use the program on your mac but you will need to open up BootCamp every time you wish to use the software, and the window will have to stay inside Bootcamp. Using Bootcamp is a perfect way to port FL studio over but this does require an official Microsoft boot CD. Download FL Studio 14.1.5 for Mac from our website for free. This free software for Mac OS X is an intellectual property of FL Studio.Wineskin. Our built-in antivirus checked this Mac download and rated it as 100% safe. FL Studio can be installed on Mac OS X 10.5.0 or later. The program lies within Audio & Video Tools, more precisely Music. There are many alternatives to FL Studio for Mac if you are looking to replace it. The most popular Mac alternative is LMMS, which is both free and Open Source. If that doesn't suit you, our users have ranked more than 50 alternatives to FL Studio and many of them are available for Mac so hopefully you can find a suitable replacement. R/FLStudio: The best FL Studio resource on the internet! It’s buggy but definitely recommend it. Im a longtime Mac user and switched over to FL 2 years ago after 15 years with logicX, MPCs, Maschine, ableton and it definitely added something to my productions. Here I got FL Studio for you! Are you ready to convert your room into a recording studio? Indeed, Install this amazing DAW Software and create multi-track music production. Apart, I am mentioning some of the smart features of FL Studio. You can use high-quality synthesizers and the effect of over 15 FX modules to enhance the best. R/FLStudio: The best FL Studio resource on the internet! It’s buggy but definitely recommend it. Im a longtime Mac user and switched over to FL 2 years ago after 15 years with logicX, MPCs, Maschine, ableton and it definitely added something to my productions.

Melody, Rhythm, Jingle, Tune, and of course Songs! Everything seems so soothing when soulful music drifts into our ears. Isn’t?

But wait, I am forgetting something!! Gosh, I was so bewildered by the fact that you are waiting for the new article and here, I am humming the tune!

Finally, the wait is over folks! Here I am going to reveal the best DAW software for music production in Mac for 2020.

But how many of you are aware of DAW Software?

I know, most of us may or may not know what DAW Software. As I always say before jumping to the subject, we will first understand what we are talking about!

DAW Software stands for Digital Audio Workstation which is utilized for music production such as recording, mixing, composing, producing and editing audio. I hope this is the short answer to your question, that is what is DAW software?

Finally, some great news for music composers and singers!

Top 5 DAW Software For Mac

Now we will make a compiled list of the best DAW software for music production in 2020.

1. Audacity

If you are a beginner or podcaster then trust me, Audacity will suit you. Another added feature is, it is free! If you are a Mac OS user or Linux or off course Windows, Audacity is ready to be operated on your operating system.

Additionally, if you are looking for basic digital recording, go for Audacity without any thought. The reason behind saying this is because Audacity doesn’t offer an option to record in MIDI. In short full mixing can’t be done with this DAW software.

Highlight Factor- Audacity is good for beginners and podcasters!

Also Read: Best Audio Editing Software For windows

2. FL Studio

Here I got FL Studio for you! Are you ready to convert your room into a recording studio? Indeed, Install this amazing DAW Software and create multi-track music production. Apart, I am mentioning some of the smart features of FL Studio.

You can use high-quality synthesizers and the effect of over 15 FX modules to enhance the best mix in the sound. Yes, you can also take the benefit of audio engines too. If you are intending to record an amazing song for the new year party and planning to impress your crush with the song. Run to install FL Studio now!

Highlight factor- Customer Support is there if you get stuck in between!

3. Logic Pro X

Logic Pro X is the ideal tool for mixing, songwriting, editing with advanced UI. So in this brisk DAW software, you can record and edit all your recordings through MIDI or other music production tools and editors. Additionally, you can save your work for future use too.

Overall Logic Pro X is the best DAW software for Mac that offers convenient control to create, edit and navigate your songs through the touch bar on MacBook Pro. There is a vast library of royalty-free loops for audio mixers and beatmakers.

Additionally, you can also customize the sound of electronic beats through Drum Machine Designers.

Highlight Factor- Choose from the 2,800 instrument and effect patches with 1,000 meticulously instruments. And yes, 7000 apple loops with a wide range of genres.

4. Pro Tools

Pro Tools is another DAW software for Mac which is designed only for artists and music composers. If you are looking for a DAW Software for professional mixing and editing, Yes Pro Tools will be your first choice.

Additionally, you can record with microphones and can also edit the tracks with the intuitive editing tools. Well, this amazing DAW Software works best with composing, mixing and editing with almost 128 audio tracks and 512 instrumental tracks along with 1,024 MIDI Tracks.

So the Pro tools is everything for your music production needs. Yes, you must give a try!

Highlight Factor- Pro Tools offers comprehensive control of this software which helps the users to understand more and easily.

5. Ableton Live 10

You can count on Ableton Live 10 as a smart DAW software for Mac. You can take any song to the live performance with the help of this DAW software which will help you to feel the real rockstar in you.

And yes this DWS software is fully harmonious for VST Standards with extra plugins. Additionally, you can choose from more than 10GB music from Ableton Live’s library with 1,800 various samples and loops. Indeed, if you are party organizer or DJ, you will surely adore Ableton Live 10, DAW Software.

Highlighted Factor- Ableton Live 10 is full of a vast library of songs along with various agile features.

Final Words

Finally, Here you go folks! I have listed the Best DAW software which will surely help you out to give the outstanding LIVE performance on this New Year’s Eve!

Moreover, if I missed out on any point, or you think any other DAW software for Mac is not mentioned here, drop your comment below.

We’re Listening!

Definitely! Our readers are important to us. We supervise all your comments and thoughts which helps us to grow even more!

I hope you liked this article. Additionally, don’t forget to follow us on social media platforms, and subscribe to our newsletter for more tips and tricks.

Don’t forget to share our work with your surroundings. Keep encouraging us. And, Yes! We are open for conversation!

What Do You Think?
Responses

When you are starting out, there are a lot of things to learn. Like how to record with a mic in FL Studio.

When you are new to the process it can seem overwhelming. But it doesn’t have to feel intimidating or overwhelming.

In this post I’ll cover the basics about how to set up and record, from a microphone in FL Studio.

It may seem complicated at first.

But I promise once you have done it a couple of times, it’ll feel like second nature.

Let’s get to it.

IF you want to see how I produce songs in FL Studio, check this FREE course out!

Basic Steps to setup your mic and interface

We’ll cover the components you need, how to set everything up the first time, and how to start recording.

I’m going to give you two options you can use for recording.
You can pick which method works best for your workflow.

Here are the pieces of audio gear you are going to need to follow along with this post:

  1. A Microphone
  2. An Audio Interface
  3. A Microphone cable
  4. A purchased copy of FL Studio Producer or Signature Edition.
  5. Laptop or Computer
  6. A pair of headphones

*Note if you are using a USB Microphone to record, the process is a little bit different.

Let’s get back to this example.

We’re going to do a couple of things to make recording happen:

  1. Setup the gear we need
  2. Open FL Studio
  3. Save the project
  4. Configure the audio interface
    1. ASIO Device
    2. Buffer Size
  5. Set the location to record audio to
  6. Setup the mixer track
  7. Set up the transport controls
  8. Record audio
    1. Option to record from playlist
    2. Option to record with Edison
  9. Advanced options
    1. Loop recording
    2. Headphone mix

STEP 1 – Setup the Gear

Plug the audio interface into the computer.

Audio interfaces come in a variety of connections.
So plug into the correct port (USB, Firewire, or Thunderbolt).

Now plug the microphone cable into the mic.
Make sure that the Phantom power button is not on on your audio interface.

And then plug the other end into your audio interface.

If the microphone needs phantom power (+48V), then push the +48V button.

Generally, condenser mics need phantom power. Dynamic mics do not.

Having phantom power on when you plug the mic into the audio interface can cause damage to your microphone.

So we want to keep that microphone working well for a long time.

Open up FL Studio

Now let’s open up FL Studio.

I’m currently running version 20 of FL Studio. Which as of 2019, is the latest version.

It looks this when you open it up …

Save the Project

First thing I like to do is to save the project.
It may seem a little weird to save a song before we’ve started.

But it’s just to help prepare where we are going to record things.

FL Studio calls the files you save projects, but really it’s a song.

Hit CTRL + S on your keyboard.

This will bring up a dialog window that lets you choose where you want to save the project.

Best Way To Put Fl Studio On Mac

So name the song what you want to. And then choose where you want to save it on your computer.

And finally press the save button.

Setting up the Audio Interface

Let’s get everything setup to record from our mic.

To get to the settings window in FL Studio, press F10 on your keyboard.

This will bring up a dialog box that has a couple tabs across the top like Midi, Audio, General and File.

This is the settings window in FL Studio.

You’re going to click on the Audio tab.
And you should see a section called input/output.

So underneath is the device drop down menu.
You want to look for your device (audio interface).

There should be some options at the top that are called direct sound devices.
And underneath of that there should be some called ASIO devices.

We want to look at the drop down menu of ASIO devices.

ASIO Settings

So from the ASIO devices menu select the driver for your audio interface.

The name of the driver might not be exactly the name of your audio interface.
I am working off of a Presonus AudioBox iTwo audio interface in this example.

And in my case the ASIO device is called AudioBox ASIO Driver.

So I select that as my ASIO Device.
And then we need to set up the buffer.

Studio

Buffer Settings

Below the device drop down menu you’ll see another box that says buffer length.

I’m not going to go into a lot of detail about this.

But for recording, you want the buffer setting as low as you can get it, without it starting to clip, crackle, or pop.

This will prevent you from hearing a delay when you go to record your audio. It will also make sure that you get a clean sound from your interface.

In my case I’m selecting a buffer length of about 6-8 milliseconds. For me, if I try to go lower than that I start to get some crackle in my recordings.

You will be able to hear pops and crackles in your recording if you have it set too low.

You can see in this menu if you have had underruns.

So now we have the audio interface setup.

Now FL Studio can receive the input from the audio interface.

So let’s choose where we are going to save our recorded files.

Choose where to save the audio files

While we still have the Setting Window open let’s do one more thing.

We’re going to go over to the Project tab.

You should see a box beneath that that says data folder.

This lets you pick the folder on your computer that you want to save the recorded audio to.

Click on the folder icon and select where you want the data to be stored.

And now we’ll move on to setting up the mixer track.

Setting up the mixer track

This is where we set up the microphone input from the mixer track.

This will get the input from the microphone and the audio interface into a mixer track in FL Studio.

The first thing that we’re going to need to do is set up your microphone in a mixer Channel.

Press F9 on your keyboard and that will bring up the mixer window.

You should see a whole bunch of vertical bars, They will be titled Insert 1, Insert 2, and so on.

These are all mixer tracks for the project that you’re working on.

Best Way To Put Fl Studio On Macbook Pro

Let’s pick Insert 4 for this example.

When you click on it you’ll see a green box around it. And the fader will turn green at the bottom.

If you go to the right side of the mixer window you’ll see another box. In that box you’ll see Slot 1, Slot 2, and so on.

These are your effects slots that you can put on an individual mixer Channel.

But we’re going to be paying attention to the drop-down menu that’s at the top. It has an arrow pointing into a box. That is where you are going to select the input that you connected your to.

When you look at the drop-down menu you should see options that have your audio interface name and then stereo and mono track options.

Since we’re recording one microphone I’m going to assume that it’s a mono source. Because most mics are mono sources unless you have a stereo microphone.

So I select mic input one. Because that’s where I plugged in my microphone.

As you talk into the microphone you should see the bars on the insert for channel moving up and down. This means that you’re getting signal into the insert Channel.

Which means that you set it up right. Woohoo!

Now onto the transport controls.

Setting up transport controls

Up at the top of the FL Studio program you’ll see some transport controls.
These are the play button, the stop button and record button.

Right click on the record button and you should see some options.
It should have a box that says recording filter. And underneath of that with options to check automation, notes, audio, and clips.

Since we are recording audio we want to make sure that the audio option is checked by right-clicking.

Next to the play button there is a button that says pat on the top and song on the bottom.

Make sure that the song button is highlighted. Because that will allow us to record directly to the playlist. If it’s not selected, press the song button now.

Now you should see a green arrow show up in your playlist window and the song button should be highlighted in green.

I also like to set up a count in before it starts recording.

This option gives you a four count click before the recording starts. Which is helpful.

Press CTRL + P to turn this option on.

Alright, you’ve finished all the setup.
Now it’s time to do some recording.

Record Audio

What I like about FL Studio is that there are several different ways of doing everything.

So there are a couple different options for recording audio:

  1. Recording directly into the playlist
  2. Recording through Edison

Before you start recording, make sure to plug in your headphones.
You don’t want the audio from the song to be bleeding into your mic.
You’ll get some weird sounds and feedback from doing that.

We’ll cover recording into the playlist first, since that is the most common.

Recording in the playlist in FL Studio

Open up the Mixer window by pressing F9.
Go to Insert 4 where we set up the mic.
At the bottom of the fader there is a track arm button.
Press that so it turns red.

You can also right click on the arm track button to bring up a window.
You could save the audio file to a different location if you want. And you can give the file whatever name you choose.

Open up the playlist window by pressing F5.
Click a spot on the playlist where you would want to start your recording.
I like to choose a spot a little before so it give me more time.

Now click on the record button in the transport bar, and wait for the count in.

Then start recording audio.

Once you are finished. Press Stop in the transport controls, or press the Space bar.

And that’s it. You’ve learned how to record a mic in FL Studio.
But I’ll show you another way to do it as well.

Recording a mic in Edison in FL Studio

Best Way To Put Fl Studio On Mac Windows 10

Let’s get back to the mixer window.
Press F9.
Then go to Insert 4.
Go to the right side where the Slots are.
Click on the down arrow in Slot 1.
A window will come up that you will show you all the available plugins.

Look for the miscellaneous section and you should see Edison.
Pick Edison and a window should pop up.

To the right of the record button is a drop down menu.
Select On Play. And then press the record button.
Nothing will happen at this point, so don’t freak out.

This option just arms Edison to record.
Then go to your playlist window.
Click where in the song you want to start recording.

I like to move the marker to a little bit before that.
It gives you a little extra time before it starts the part you want to record.

When you are ready hit the play button.
This will start the recording in Edison.

When you are done, press the Stop on Edison.
And then you can Press stop on the Transport Controls in the Playlist.

There’s a button in the top right side of Edison.
Click that and then drag what you recorded into the playlist where you set your marker to start.
Everything will be lined up.

And that’s all you have to do to record audio in Edison.

BONUS TIPS – ADVANCED RECORDING OPTIONS

Now we’re getting into the extra credit section. You don’t have to do this.

But this is a way to take your mic recording skills to the next level.

Multiple Takes

One of the reasons that I like using Edison to record is the multiple takes option.
So as I’m putting together a song, I can highlight a certain section I want to record.
Let’s take the chorus for instance.

I can go the Playlist window by pressing F5.
I right click and drag around the section of the song I want to record.
Open up Edison on the Mixer Track, with the On Play option selected.
Arm Edison to record by pressing the record button.

Now when I press Play on the transport controls it will record.
It will keep recording as many takes of that section as you want.
I could do 3-5 takes on that one part.

Stop Edison when you are done. And stop the song in the transport controls.

Now in Edison you should see multiple takes.
I can select one of those takes by double-clicking on the orange marker at the front.

Then I can drag that take into the playlist. Using the drag to playlist option on Edison. (The button that’s highlighted in blue below)

I could drag all of them in individually if wanted.
Then I could create vocal comps of the best of those takes. But that’s a different subject.

Separate Mix

Another option you can try is to set up a headphone mix for your vocalist.

Each track in the mixer window is routed by default to the Master Fader.
You can see this when you click on any of the Insert tracks. It’s the neon green line that goes to the Master Fader.

You can change the default routing of a track if you want, though.

So let’s go back to Insert 4, where we set up our mic.

Now right click on the arrow at the bottom of Insert 5. You’ll see an option box come up.
It looks like this.

Now we’ll select the option that says route to this track only.
This is going to send the audio from Insert 4 to Insert 5 only.

So we’ve set up a new signal path for Insert 4.

It used to be that Insert 4 went directly to the Master Fader.

Now Insert 4 goes to Insert 5, and then to the Master Fader.
So we’re going to set up effects on Insert 5. And that will go into the Master Fader.
So that’s what you’ll hear in the headphones.

But, we will record on Insert 4, where there will be no effects.
So we’ll have a dry signal that we can edit and add effects to later.

So click on Insert 5.
Now go the Slots on the right side of the Mixer Window.
In Slot 1, let’s pick Fruity Delay 2.
In Slot 2, let’s pick Fruity Reeverb 2.

So if you sing into the mic. You’ll hear the effects.
But, if you record the vocals from Insert 4, there won’t be any effects.

This gives you the opportunity to edit and add different effects later in your mix.

So there you have it.

You’ve learned how to record with a mic in FL Studio. And I’ve given you some bonus tips on how to record multiple takes. And even set up a separate headphone mix for a vocalist.

Learn how to produce full songs in FL Studio with this FREE class

Best Way To Put Fl Studio On Macbook

I hope you enjoyed it.